Publicité
Les langues disponibles
Les langues disponibles
In case of reception for the radio-controlled clock, a triangle will appear during
second 0 between the day and the date. For example, the following may be
displayed:
We 06-08-30 08:15:00
If the reception of the DCF77 signal should be disturbed, date and time can be
set manually.
•
Press the menu key and use the + or – key to select the menu "Set date and
time". Confirm with ok.
•
Now you may set: week day – day –
month – year – hours (0 to 23) – minutes
– seconds.
Please pay attention to the order!
•
By using the + and – keys, you may change
the respective value, with ok you will switch to the next position.
If all adjustments have been completed, you will automatically leave the menu
item "Set date and time", and you may select further menu items or return to
the starting position with weather information display by pressing menu.
Adjustment of the alarm
With this menu item you may adjust the time period during which a connected
motion detector is to be active. If the motion detector triggers an alarm during
this time, all windows (groups) will be closed for approx. 5 minutes, and the
fitted multifunctional relay is switched on if it has been set as alarm relay.
Instead of the indication of date and time, the message "Alarm! Close
windows!" will be indicated on the display. If no other alarm signal is received
within the next 5 minutes, normal automatic operation will be resumed.
Please note: This menu item will only be displayed if the motion detector was
activated in the basic setting (see chapter "Basic adjustment of the motion
detector ", p. 113).
Also manually opened windows will be closed by the alarm
message!
•
After pressing the menu key, use the + or – key to select the menu "Set
surveillance period for motion detector". Confirm with ok.
Set date and time
We 30-08-06 17:15:33
87
Publicité
