Publicité
Les langues disponibles
Les langues disponibles
For safety reasons, once a day the reset will be carried out by the control itself.
You may choose at what time this function is to take place.
•
You may adjust the reset time and confirm
with the ok key. By pressing menu, you
will return to the control's automatic mode.
Multifunctional relay
The multifunctional relay may be adjusted for the connection of heating or
cooling, or as alarm output. Please note that only one of the mentioned
functions may be activated. The basic configuration is carried out in the menu
"Change basic setting of output channels" (see chapter "Basic adjustment of the
connected components", p. 109).
Adjustment of the heating
Please note: This menu item will only be displayed if the multifunctional relay
has been adjusted for the function "heating".
•
After pressing the menu key, use the + or – key to select the menu "Set
heating or operate manually" and confirm with ok.
•
The display shows:
After pressing the ok key, the heating
may be switched on and off with
the + key. The status will be indicated.
•
If during the question whether you would like to manually operate the
heating, you press the menu key, you may adjust the values for automatic
operation:
•
First the indoor temperature is requested.
By using the + and – keys, you may adjust
the indoor temperature which must be
fallen below to switch on the heating.
Confirm with ok.
•
If the heating is to be reduced at night,
you may now adjust the time period.
Confirm with ok.
Switch all channels
to automatic mode
daily at
3:00
Keys: menu + ok -
Do you want to
operate the heating
manually?
Yes = ok No = menu
Heating on if
indoor temperature
falls below
Keys: menu + ok -
Night reduction of
heating
from
to
00:00
00:00
1°C
89
Publicité
