Publicité
Les langues disponibles
Les langues disponibles
Description
The WS1 conservatory control was developed to provide a central control for the
various technical equipment installed in conservatories. The control provides a
maximum of flexibility for connection and setting, and may therefore be
individually adjusted to perfectly fit your conservatory. Please always use this
instruction manual in order to adjust the automatic functions to your
requirements, and to guarantee comfortable manual operation.
Scope of supply
The WS1 conservatory control is available in 4 designs with 1, 2, 3 or 4 output
channels. Each version's scope of supply includes the control and the P03
weather station.
Start-Up procedure
Installation, inspection, commissioning and troubleshooting
of the conservatory control must only be carried out by a
competent electrician.
For starting control WS1 proceed as follows:
1.
Installation and connection (see the chapter "Installation and commission-
ing")
2.
Basic adjustment (see the chapter "Basic adjustment")
3.
Adjustment of the Automatic mode (see the chapter "Adjustment of the
automatic system")
Connection and control possibilities
The following equipment may be connected to the control:
•
Electrically operated roof awnings
•
Electrically operated blinds
•
Electrically operated windows/sliding roofs
•
Motion detectors
•
Heating or cooling systems may be connected to the multifunctional relay,
or it may be used as output for an alarm system
73
Publicité
