Publicité
Les langues disponibles
Les langues disponibles
air flaps and ventilator) or a fresh air and heating combination (with supply
air flap, ventilator and heater coils). Confirm your entry with ok.
•
Proceed correspondingly with the other available WGBLs.
Basic adjustment of the multifunctional relay
After allocation of the channels (and possibly the configuration of WGBLs), the
multifunctional relay will be adjusted.
•
With the + and – keys you may select
whether you would like to control a
heating or cooling system or whether
the relay is to be activated in case of
alarm from a motion detector. In addition, you may select the option "Not
in use". Confirm you selection with ok.
Allocation of the external manual key
After the basic adjustment of the multifunctional relay, the display will show:
•
With the + and – keys you select the
channel that you would like to operate with
the key (max. 4 channels available with
WS1-4). Confirm your selection with ok.
Basic adjustment of the motion detector
After the allocation of the manual key, the alarm input is activated. Please
indicate whether you have connected a motion detector or other alarm contacts.
•
Select with + and – and confirm with ok.
Teach-in of radio subscribers
Here you may teach in radio-controlled ventilation units or Daikin air-
conditioning units. For this purpose, the radio module (supplied with the radio
subscriber) must be installed
ventilation units").
(see p. 106 "Connection of Elsner wireless
Operation mode of
multifunctional rel.
Heating
Keys: + ok -
External manual
key programmed
for awning 1
Keys: + ok -
Is an alarm contact
or motion detector
connected?
Keys: + ok -
No
113
Publicité
