Publicité
Les langues disponibles
Les langues disponibles
Blocking temperatures for blinds
Please note: This menu item will only be displayed at least one channel has
been configured as "blind" in the basic setting (see chapter "Basic adjustment of
the connected components", p. 109).
•
After pressing the menu key, use the + or – key to select the menu "Set
blocking temperature for blinds". Confirm with ok.
•
Using the + and – keys, you may now adjust
the indoor temperature, below which the
blinds should not extend. The automatic
sun system will be disabled until the
blocking temperature has been reached (heat gain).
•
After confirming the indoor blocking temperature by pressing the ok key,
you may enter the desired outdoor temperature, below which the blind
should not be moved. If your blind is able to work even in case of low
temperatures, then set this value to –20°C. If the blinds are to be blocked in
case of low outdoor temperatures, then please request the blocking
temperature from you blind manufacturer.
Please note that the guide rails of the blind or other mechanical parts may still
be frozen, even if the outdoor temperature has already increased to relatively
high values. If in this case the blind is moved, it may get damaged. Manual
operation is also possible for blinds that are blocked by temperature.
Please note that in case of night-time and time blocking the
antifreeze system (the automatic stop controlled by the
outdoor temperature) is not activated! Drives and blind may
be damaged, if a frozen outdoor blind is moved!
If all adjustments have been completed, you will automatically leave the menu
item "Set blocking temperature for blinds", and you may select further menu
items or return to the starting position with weather information display by
pressing menu.
Adjustment of date and time
In case of sufficient reception for the radio-controlled clock, time and date are set
automatically after approx. 10 minutes.
86
Block blinds until
indoor temperature
exceeds 18°C
Keys: menu + ok -
Publicité
