Publicité
Les langues disponibles
Les langues disponibles
•
By using the + and – keys, you may now
adjust the period during which the motion
detector/alarm reception is to be active
every day. After changing the
hours/minutes, please save your value by pressing the ok key. The cursor
(flashing rectangle) will then automatically jump to the next position.
If all values have been completed, you will automatically leave the menu item
"Set surveillance period for motion detector", and you may select further menu
items or return to the starting position with weather information display by
pressing menu.
Reset to automatic mode
After manual operation, the concerned channels will always remain in manual
mode. This will be indicated on the display (f. ex. "Output channels manual: – 2 3
–" if channel 2 and 3 were operated manually). You may manually switch the
channels into the automatic mode, or wait for the daily automatic reset. This
reset to the automatic mode, which takes place once a day, prevents for example
that a window is opened manually and then forgotten to close.
If control starts after a power failure or after re-start, all channels are in
automatic mode.
With each re-start or reset, a reference motion of the windows will be carried
out. This includes fully closing all windows that have been set as sliding
windows or for opening in stages, in order to determine the initial position
("window closed ").
If one of the output channels 1 to 4 was manually operated, the automatic
function may be re-activated by simultaneously pressing the arrow keys for "up"
and "down" at the respective channel.
If the entire control, the multifunctional relay or a WGBL is to be reset to
automatic mode after manual operation, proceed as follows:
•
After pressing the menu key, use the + or – keys to select the menu "Set
control to automatic mode/set time for automatic reset". Confirm with ok.
•
By pressing ok you may now reset all
channels and connected equipment into
the automatic mode. Even channels the
automatic reset of which was deactivated
in the basic settings will be reset to automatic mode! With menu you may
access the adjustment of the reset time.
88
Activate alarm
entry
from
to
00:00
00:00
Switch control
back to automatic
mode now?
Yes = ok No = menu
Publicité
