Publicité
Les langues disponibles
Les langues disponibles
Use the + and – keys to select the menu item "Change the control access
code". Confirm with ok.
•
Please enter the desired code in single
numbers using the + and - keys.
Confirm each digit with ok.
If you would like to delete the request for the access code, please enter
0000. Confirm your adjustments with ok.
With the menu key you may return to the starting position of the control.
Reading of customer service data
This menu contains specific data such as type of control, software version and
calibration data. In addition, changes to the rotational direction at the output
channels and changed keyboard layouts are saved and displayed in this menu.
•
In the starting position of the control, keep the ok key pressed and
additionally press the menu key for 2 seconds. The display will show:
"Change basic settings of output channels?
Use the + and – keys to select the menu item "Read customer service data"
Confirm with ok.
•
With the displayed values, any changes to
the rotational direction or changed key-
board layouts may be traced back. If the
rotational direction or the keyboard layout
was changed, a 1 will be displayed for the relevant output channel. With ok
you may access the next display page.
•
On this page, the calibration data are
displayed. With ok you may access the
next display page.
•
If an external indoor sensor with thermo-
meter and hygrometer is connected, the
display will show "External indoor sensor
installed". With ok you may access the
next display page.
118
Please enter the new
access code:
****
Keys: menu + ok -
WS1-X V X.X
Dir. of rota.: 0 0 0 0
Key change: 0 0 0 0
Key: ok
Calibration data
OSCCAL: XY
10ms Value: 12345
Key: ok
External indoor
sensor
not installed
Key: ok
Publicité
