Piccolo Xpress Manuel De L'opérateur page 17

Once the pouch is opened, do not place the disc back in the refrigerator for later use.

Keep discs clean. Handle them only by their edges to avoid smudges on the optical sur-

faces. Use a lint-free tissue to remove any spilled blood from disc surfaces.
Optional: Write the patient identification

number on the disc surface in the space
shown at right. Do not write anywhere else
on the disc, or on the bar code ring.
Hold reagent discs flat after introducing the

sample or control to avoid spillage.
WARNING: BIOHAZARD: U
RATORY WORKING PRACTICES
NATED WITH HEPATITIS OR OTHER INFECTIOUS DISEASES
APPROPRIATE STATE AGENCY REGARDING DISPOSAL REGULATIONS
INFORMATION
2.7 Installing a Printer Paper Roll
1. Open the printer cover. If the printer contains a roll of
paper, remove it.
2. Remove the wrapper from the new paper roll, then unroll
several inches of printer paper.
3. Put the paper roll into the printer so that the paper unrolls
from the bottom of the roll and out towards the front of
the analyzer, as shown.
4. Make sure several inches of paper extend out of the
printer slot.
5. Press the cover closed until it locks into place.
6. Pull gently on the end of the paper until it is taut.
SED REAGENT DISCS CONTAIN BODY FLUIDS
. H
ANDLE ALL USED DISCS AS IF THEY ARE CONTAMI
, "U P
SEE NIVERSAL
Setup and Description
"
RECAUTIONS ON PAGE
Write patient
ID here
. F
OLLOW GOOD LABO
. C
HECK WITH THE
. F
OR MORE
1-2.
-
-
2-9