Stryker Isolibrium 2971 Manuel D'utilisation Et D'entretien page 53

Power supply replacement (Continued)
9. Remove and discard the power supply (AY)
10. Reverse steps to reinstall.
Notes
• During reinstall, make sure to align the Velcro® patches.
• After installation, remove the zipper pull tool or equivalent from the zipper.
• Make sure that the watershed covers the zipper.
• Do not dispose of as unsorted municipal waste. See your local distributor for return or collection systems
available in your country.
11. Verify proper operation before returning the product to service.
www.stryker.com
Service
(Figure 1-20 on page 1-44).
2971-109-0 01 REV B
E E N N
1-45