Stryker Isolibrium 2971 Manuel D'utilisation Et D'entretien page 49

Foot box cover access (Continued)
13. Using a T15 Torx driver, remove the nine ground screws (B) and nine star washers (D)
Save the ground screws and star washers.
Notes
• During reinstall, tighten the screws equally and do not over tighten. Torque (B) to 22 ± 4 in-lb.
• During reinstall, check the LAL fan cable (G) and grommet (H) are in place before replacing the foot box cover
(1-18 Foot box coveron page
14. Remove the foot box cover (AF)
www.stryker.com
Service
Figure 1-17: Gel crib
1-42).
(Figure 1-18 on page 1-42). Save the foot box cover.
2971-109-0 01 REV B
(Figure 1-16 on page 1-40).
1-41
E E N N