Stryker Isolibrium 2971 Manuel D'utilisation Et D'entretien page 30

Notes
E E N N
• *A zipper pull tool or equivalent is required to access the internal components of the support surface.
• **You cannot perform these preventive maintenance checks without the InTouch footboard. See the InTouch
integrated Models 2131 and 2141, software version 4.0 or higher manual.
• The zipper overlaps at the end and may appear to be misaligned.
Replace the following items every two years:
• Cover assembly, top and bottom
Product serial number:
Completed by:
1-22
Preventive maintenance
2971-109-001 REV B
Date:
www.stryker.com