Correct Operation Checks - SICE S 45 Manuel D'instructions

CODE 4-402838
CODE 3014056
WARNING:
Unreadable and missing warning labels must be replaced immediately.
Do not use the tyre changer if one or more labels are missing.
Do not add any object that could prevent the operator from seeing the labels.
Use the code in this table to order labels you need.
Once the connections described above have been made (See "Installation"), check to make sure
the tyre changer works properly by carrying out the following procedures:
1) Press pedal (1, Fig. P) down to its middle position (see Fig. Q): the table top (2, Fig. P) should
turn clockwise at the low speed;
press the pedal all the way down (see Fig. Q): the table top should turn clockwise at high speed;
pull the pedal up (see Fig. Q): the table top should turn anticlockwise.
S 45
CODE 3014095

9. CORRECT OPERATION CHECKS

CODE 3014046
CODE 4-402938
42
ENGLISH • Instructions manual
CODE 4-402837
anti-clockwise
0
clockwise (1-speed)
clockwise (2-speed)
Q