Cleaning; Recommended Routine Care/Cleaning Method; Washing Procedure - Stryker 6005 Manuel D'utilisation

Thoroughly clean the Transfer Flat after each use.

RECOMMENDED ROUTINE CARE/CLEANING METHOD

• Apply disinfectant solution either by spray, solution or pre-impregnated wipes
(do not soak Transfer Flats).
• DO NOT STEAM CLEAN, PRESSURE WASH, OR ULTRASONICALLY CLEAN
Transfer Flats.
• Allow to air dry.
WARNING
Do not power wash. The Transfer Flat is not designed to be power washable.
Risk of airborne contamination may cause injury to users.

WASHING PROCEDURE

IMPORTANT: DILUTE ALL DISINFECTANTS IN ACCORDANCE WITH
MANUFACTURER'S DIRECTIONS.
Follow the cleaning solution manufacturer's dilution recommendations exactly.
In general, when used in those concentrations recommended by the manufacturer,
either phenolic type or quaternary (excluding Virex® TB) type disinfectants can
be used. Iodophor type disinfectants are not recommended for use because
staining may result.
Suggested cleaners for the Transfer Flat:
• Quaternary Cleaners (active ingredient - ammonium chloride)
• Phenolic Cleaners (active ingredient - o-phenylphenol)
• Chlorinated Bleach Solution (5.25% - less than 1 part bleach to 100 parts water)
www.stryker.com

Cleaning

6005-009-001 REV A
Return To Table of Contents
1-15
English