Cleaning And Disinfecting With Wipes - Stryker 4701 Manuel D'exploitation

English
For United States only. Confirm availability for your configuration or region. Call Stryker Customer Service: 1-800-327-
EN
0770.
Stryker's preferred wipes (2060-000-001 6'' x 10'' or 2060-000-002 9'' x 12'') include the following active ingredients:
• n-Alkyl (60% C14, 30% C16, 5% C12, 5% C18) dimethyl benzyl ammonium chloride - 0.154%
• n-Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chloride - 0.154%
• Isopropanol - 21.000%
Non-active ingredient: Ethylene Glycol Monobutyl Ether - less than 3%
Note: For safety information, read the product label.
To clean or disinfect the external product surface:
1. To clean, wipe external surfaces with a fresh, clean wipe to remove all visible soils. Repeat as necessary until the
product is clean.
Notes
• Use as many wipes as necessary.
• Complete step 1 before you disinfect.
2. To disinfect, wipe external surfaces with a fresh, clean wipe until wet. Allow the external surface to remain wet for
two minutes at room temperature.
3. Allow the product to dry before you return it to service.
1-44

Cleaning and disinfecting with wipes

4701-209-001 REV B www.stryker.com