Accessories; Contacting Boston Scientific - Boston Scientific SC-5210 Manuel

EN 60601-1 Classification Information
Internally Powered Equipment
Continuous Operation
Ordinary Equipment
Class II
Table 201 – Guidance and Manufacturer's Declaration – electromagnetic emissions – for all Equipment and Systems (see 6.8.3.201 a) 3))
Guidance and Manufacturer's Declaration - electromagnetic emissions
The SC-1110 intended for use in the electromagnetic environment specified below. The customer or user of the SC-1110 should assure
that it is used in such an environment.
Emissions Test Compliance
RF emissions CISPR 11 Group 1
RF emissions CISPR 11 Class B
Harmonic emissions Not Applicable
IEC 61000-3-2
Voltage fluctuations / Flicker Not Applicable
emissions IEC 61000-3-3
Hereby, Boston Scientific declares that the Precision System and other relevant provisions of Directive 1999/5/EC. Stimulation System is in
compliance with the essential requirements.

Accessories

Washing the Charger Belt
Wash the Charger Belt with mild soap and warm water.

Contacting Boston Scientific

There are no user serviceable parts. If you have a specific question or issue, please contact your healthcare professional.
If you need to contact Boston Scientific for any other reason, contact information is found on the last page and back cover of this
manual.
Electromagnetic Environment Guide
The SC-1110 uses RF energy only for its internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in nearby electronic equipment.
The SC-1110 is suitable for use in all establishments other than domestic and those directly
connected to the public low-voltage power supply network that supplies buildings used for
domestic purposes.
EN 60601-1 Classification Information
Patient System Handbook
9055960-003 REV B 41 of 233
Help