6
Help
Stimulation
No Stimulation
1. Toggle the
Remote Control stimulation on/off button to make sure that stimulation is ON. If the Remote Control receives
!
confirmation from the Stimulator, it will flash "Stimulation On."
2. Turn up the level of stimulation from the main screen or area screens.
3. Charge the Stimulator. When the charge is complete, try turning the stimulation on.
4. Call your healthcare professional if the above steps do not solve the problem.
Stimulation Increases or Decreases on Its Own
1. Stimulation can change depending on body position (lying down, standing or bending).
2. Always keep the Remote Control with you, so that you can adjust your stimulation levels as needed.
Patient System Handbook
9055960-003 REV B 34 of 233