Patient System Handbook
2. If the Pulse Width Area 1 screen is displayed, make another long
adjust, press either p or q to increase or decrease the Rate.
3. To move to another area, press
screen (2, 3 or 4) that you want.
4. Press either p or q to increase or decrease the Rate.
Note:
You may also find Rate Area 1 by making a long
• The Remote Control will beep to notify you if you reach a preset limit while increasing or decreasing the Rate.
To return to the Level screen from any Rate screen, press and hold
To Restore a Clinician Program
Over time, you may have made changes to one or more of the programs originally saved to your Remote Control. The Restore option
allows you to return to those original stimulation settings if ever you become dissatisfied with a changed program.
Patient System Handbook
9055960-003 REV B 24 of 233
"
briefly (a "normal" press) to cycle through your programmed areas until you find the Rate Area
"
button press from any Pulse Width screen.
"
button press to Rate Area 1. If this is the area you want to
.
"