Replacing the bulbs
Before replacing a burnt-out bulb, make sure that the new
one complies with voltage and wattage as specified in the
"Electrical System" for that lighting device at page 70.
Headlight (fig. 52)
To facilitate servicing the headlight, remove the headlight
fairing as explained in "Removing the headlight fairing"
(page 44).
To access the headlight bulbs, undo the lower screw (1)
securing the surround/reflector assembly to the headlight
body.
Detach connector (2, fig. 53) from the headlight bulb.
Release the clip (3, fig. 53) retaining the bulb and remove
it from the mount.
1
3
E
fig. 52
2
fig. 53
53