Bosch RIESE & MULLER BDU330 Mode D'emploi page 69

EN-132
crease the performance of your eBike system.
Doing so will generally reduce the service life of the
system and risks damaging the drive unit and the
bike. You also run the risk of losing the guarantee
and warranty claims on the bicycle you have pur-
chased. By handling the system improperly you are
also endangering your safety and that of other road
users, thus running the risk of high personal liability
costs and possibly even criminal prosecution in the
event of accidents that can be attributed to manip-
ulation of the bicycle.
Under extreme conditions, such as con-
tinuously high loads at low speed when
riding up hills or carrying loads, parts of
the drive unit can reach temperatures
in excess of 60 °C.
Please observe all local, state and federal regu-
u
lations when registering and using eBikes.
Read and observe the safety warnings and in-
u
structions in all operating instructions of the
eBike system and your eBike.
Privacy notice
When you connect the eBike to the Bosch Diagnostic-
Tool, data about the eBike drive unit (e.g. energy con-
sumption, temperature, etc.) is transferred to Bosch
eBike Systems (Robert Bosch GmbH) for the pur-
poses of product improvement. You can find more in-
formation about this on the Bosch eBike website at
www.bosch-ebike.com.
Bosch eBike Systems
English – 5 English – 6
Intended use
The drive unit is intended exclusively for driving your
eBike and must not be used for any other purpose.
Technical data
Drive unit
Product code
Continuous rated power
Torque at drive, max.
Rated voltage
Operating temperature
Storage temperature
Protection rating
Weight, approx.
The Bosch eBike system uses FreeRTOS (see http://www.freertos.org).
Bicycle lights
Voltage approx.
Maximum power
– Front light
– Rear light
A) Depends on legal regulations, not possible in all country-specific models via the eBike battery
B) When changing the bulbs, ensure that they are compatible with the Bosch eBike system (ask your bicycle dealer) and are suit-
able for the specified voltage. Bulbs must only be replaced with bulbs of the same voltage.
Inserting a bulb incorrectly can cause it to blow.
0 275 U07 XD3 | (08.04.2020) 0 275 U07 XD3 | (08.04.2020)
Product description and specifications
In addition to the functions outlined here, changes to
software relating to troubleshooting and functional
modifications may be introduced at any time.
Active Line Active Line Plus Performance Line Performance Line
BDU330
W 250
Nm 40
V= 36
°F +23 to +104 +23 to +104
°F +50 to +104 +50 to +104
IP 54
kg 2.9
A)
B) V=
W
W
EN-133
Sport
BDU380 BDU385 BDU386
250 250 250
50 65
36 36
+23 to +104 +23 to +104
+50 to +104 +50 to +104
IP 54 IP 54 IP 54
3.2 3.2
12
17.4
0.6
Bosch eBike Systems
65
36
3.2