Bosch RIESE & MULLER BDU330 Mode D'emploi page 55

EN-104
Start page
When you insert the on-board computer into the
holder while it is switched on, it will display the start
page.
b
c
d
a
k e
j
i
24,
3
f
h
g
a Time/speed indicator
b Assistance level indicator
c Lighting indicator
d Battery charge indicator of the eBike battery
e Unit of speed indicator A)
f Speed
g Navigation bar
h Motor output
i Your performance
j Average speed
k Performance evaluation
A) Can be changed via the <Settings> status page.
The a ... d indicators form the status bar and are
shown on every page. If the speed is already being
displayed on the screen itself, the a indicator will
change to the current time in hours and minutes. The
status bar displays:
– Speed/time: The current speed in km/h or mph or
the current time
– Assistance level: Indicates the current level of as-
sistance using a color code
– Light: A symbol that indicates whether the light is
on
Bosch eBike Systems
English – 15
– eBike battery state of charge: Indicates the cur-
rent state of charge as a percentage
The performance evaluation k graphically displays
your current speed (white bar) in comparison to your
average speed j. The graphic shows you whether your
current speed is faster or slower than your average
speed (left of the black line = lower than average
value; right of the black line = higher than average
value).
The navigation bar g indicates which page you are on.
Your current page is highlighted. You can use the
< (10) and > (8) buttons to move to additional pages.
From the initial start page, you can access the status
page via the < (10) button.
Status screen
As well as the status bar,
the status page also
shows you the current
time and the state of
charge of all your eBike's
batteries, as well as the
state of charge of your
smartphone battery if the
smartphone is connected
via Bluetooth®.
It may also display symbols to indicate an activated
Bluetooth® function or a device connected via
Bluetooth® (e.g. a heart-rate monitor). You will also
be shown the date of the most recent synchronization
between the smartphone and Kiox.
You can access the <Settings> from the bottom sec-
tion.
<Settings>
You can access the settings menu via the status
screen. The <Settings> cannot be accessed or
changed while riding.
You can use the – (11) and + (12) buttons to select
the setting you want. You can open the settings, as
well as any additional submenus, using the select but-
1 270 U20 XBK | (16.04.2020)
English – 16
ton (9). You can use the button < (10) to go back to
the previous menu from any settings menu.
You can find the following superordinate sections on
the first navigation level:
– <Registration> – Registration notification:
This menu item is only shown if you have not yet
registered on eBike Connect.
– <My eBike> – Settings for your eBike
You can reset the counters (such as the number of
kilometers traveled that day or average values) to
zero either automatically or manually, and you can
reset the range. You can change the wheel circum-
ference value that was preset by the manufacturer
by ±5 %. If your eBike features eShift, you can also
configure your eShift system here. The bicycle
manufacturer or dealer may base the service date
on the distance traveled and/or a period of time.
The due date for the service is displayed under
<Next Service: [DD. Mon. YYYY] or at [xxxxx]
[km]>. The bike component page displays the se-
rial number and hardware and software versions
for each component, in addition to other key data
that is relevant for the components.
– <My profile> – Active user data
– <Bluetooth> – Switch the Bluetooth® function on
or off:
Connected devices are displayed.
– <Sys settings> – A list of options for adjusting the
settings of your on-board computer:
You can display the speed and distance in kilome-
ters or miles, display the clock in 12- or 24-hour
format, adjust the time, date and time zone and se-
lect your preferred language. You can reset the Kiox
to its factory settings, run a software update (if
available) and choose between a black or white de-
sign.
– <Information> – Information about your Kiox:
References to FAQs (frequently asked questions),
certifications, contact information, license informa-
tion
1 270 U20 XBK | (16.04.2020)
You can find a detailed description of each parameter
in the online operating instructions at
www.Bosch-eBike.com/Kiox-manual.
Quick Menu
Selected settings are displayed on the Quick Menu.
These settings can be changed even while riding.
You can access the Quick Menu via the select but-
ton (9). It cannot be accessed from the Status
screen.
The following settings can be changed via the Quick
Menu:
– <Reset trip data?>
All data on the journey so far is reset to zero.
– <eShift>
You can set the cadence here.
– <eSuspension>
This is where you can set a manufacturer-defined
shock absorption or suspension mode.
Bosch eBike Systems
EN-105