Bosch RIESE & MULLER BDU330 Mode D'emploi page 64

EN-122
display until the user presses the
select button (9) to acknowledge
the error. The warning triangle
subsequently remains in the main
display view (alongside speed,
etc.) until the error has been re-
solved.
In a two-step activation process,
HOLD '+' NOW
after pressing the (13) button,
the rider is prompted to press the
+ button (14) for two seconds.
After two seconds, the push assis-
tance mode is displayed.
This indicator and the text shown
!
on the left appear when there are
problems that mean that the drive
ENGINE OFF
unit cannot provide any assis-
tance. This is the case if, for ex-
n/a
KM
D I S A B L E D ample, the eBike battery is empty.
35
%
If the eBike battery is being
68%
charged, the screen shows the
current state of charge. The bat-
tery symbol flashes.
This indicator appears if, for ex-
ample,
– the DiagnosticTool is connected
or
– an external power source is
connected to the Smartphone-
Hub (e.g. a powerbank)
If the state of charge of the eBike
24 5 74
KM
battery is below 20 %, the battery
35
KM/H
%
charge indicator h will flash.
This indicator appears if, for ex-
ample,
– the state of charge of the eBike
battery is low or
– no eBike battery is recognized
by the system.
Bosch eBike Systems
English – 13
The assistance is switched off.
These indicators appear when the
eBike is due for servicing.
INSPECTION DUE
This indicator appears if software
x x
___ problems occur. A software up-
date must be carried out in the
COBI.Bike app.
You can carry out the update inde-
pendently in the COBI.Bike app
and you do not have to go to a
Bosch eBike dealer.
This indicator appears when the
SmartphoneHub is connecting to
the smartphone.
The completion of the Bluetooth®
pairing is indicated by means of a
check mark against the small
smartphone symbol.
This indicator appears whenever
the SmartphoneHub is in recovery
mode (only in this status can new
software be installed). The small
Bluetooth® symbol indicates the
connection to the smartphone.
The completion of the recovery
operation is indicated by a check
mark.
Your operating system is non-
functional for the following rea-
sons:
CHECK APP 1. One or more incompatible
components have been de-
tected. This state can only be
rectified by a Bosch eBike
dealer.
2. An out-of-date version of the
software has been detected.
1 270 U20 XBC | (29.04.2020)
English – 14
This can only occur as a result
of an intentional software
downgrade. The problem can
be resolved with a software up-
date. Please follow the instruc-
tions in the COBI.Bike app.
Following this notification, the
eBike system switches off.
This indicator appears when the
COBI.Bike app is open and in
APP MODE
dashboard mode.
This indicator appears when the
74
KM
+ t o s t a r t
35 COBI.Bike app is connected to
%
the Bosch SmartphoneHub and
the drive unit is waiting to be
switched on. To do this, perform
one of the following actions:
– Press the "Start" button in the
COBI.Bike app.
– Turn the smartphone into the
horizontal position while the
COBI.Bike app is open.
– Press the + button on the oper-
ating unit.
This indicator appears when one
1/1
eBike system
or several eBike components re-
update necessary
quire a software update.
The update can only be carried
out by an authorized Bosch eBike
dealer.
The indicator can be hidden by
pressing any button on the oper-
ating unit. The indicator appears
during every eBike system start-
up until the update has been car-
ried out. You can still continue to
use your eBike without restric-
tions. The number at the top on
the right will indicate the number
of notifications.
1 270 U20 XBC | (29.04.2020)
EN-123
Bosch eBike Systems