Checking Brake Pads For Wear; Adjusting The Throttle Cable - Ducati MONSTER S4R Manuel D'utilisation Et Entretien

Checking brake pads for wear (fig. 47)
Front brake
To facilitate inspection without removing the pads from
the calipers, brake pads have a wear mark. If the grooves
in the friction material are still visible, the pad is still in good
condition.
Rear brake
The thickness of the friction material on each pad must be
E
at least 1 mm.
Important
Have the brake pads replaced at a Ducati Dealer or
Authorized Workshop.
1 mm
fig. 47

Adjusting the throttle cable

The throttle twistgrip must have a free play of 2 - 4 mm
measured at the edge of the twistgrip, at all positions of
the handlebars. If necessary, adjust the play with the
adjuster (1, fig. 48) located on the twistgrip itself.
1
fig. 48
49