DIRECTIONS FOR USE
Running-in precautions (fig. 31)
Important
During the entire running-in period, the maintenance
E
and service rules recommended in the warranty card
should be observed carefully. Failure to comply with these
rules will release Ducati Motor Holding S.p.A. from any
liability whatsoever for any engine damage or shorter
engine life.
Max. engine speed
Road and engine speed limits to be observed during the
running-in period and in normal operation:
1) up to 1000 km;
2) from 1000 to 2500 km.
34
Up to 1000 km
During the first 1000 km, keep an eye on the revolution
meter. The indicator must not exceed:
6,000 rpm.
During the first hours of riding, it is advisable to run the
engine at varying load and rpm, though still within
recommended limit.
To this end, roads with plenty of bends and even slightly
hilly areas are ideal for a most efficient running-in of
engine, brakes and suspension.
For the first 100 km, use the brakes gently. Do not brake
violently or keep brake applied for too long. This will enable
a correct break-in of friction material on brake pads against
brake discs.
For all mechanical moving parts of the motorcycle to adapt
to one another and above all not to adversely affect the
life of basic engine parts, it is advisable to avoid harsh
accelerations and not to run the engine at high rpm for
too long, especially uphill.
Furthermore, the drive chain should be inspected
frequently. Lubricate it as required.