LCD display functions
When the key is turned from OFF to ON, the instrument
panel runs a check-up routine of all instruments (pointers,
display, lights) (fig. 5 and fig. 6).
LCD unit functions (1)
Press the button (B, fig. 6) with the key turned to ON to
cycle through trip meter and odometer indication.
E
Resetting the trip meter
Hold down button (B, fig. 6) for more than 2 seconds in
TRIP mode to reset the display (LCD 1).
LCD unit functions (2)
Press button (A, fig. 6) with the key turned to ON to
display the clock and coolant temperature.
Clock setting
Hold down button (A, fig. 6) for at least 2 seconds.
To select AM/PM, press button (B, fig. 6). Press button (A)
to confirm and enter hours setting mode. Set the hours by
pressing button (B) repeatedly. Press button (A, fig. 6) to
move enter the minutes setting mode.
Press button (B) to increment the minutes setting; hold it
down for more than 5 seconds to increase the setting
more quickly. Press button (A) to confirm and exit setting
mode.
12
OFF
CHECK
1
A
B
2
fig. 5
fig. 6