Seat And Helmet Compartment Lock - Ducati MONSTER S4R Manuel D'utilisation Et Entretien

Seat and helmet compartment lock

(fig. 21 and fig. 22)
Opening
Insert the key into the seat lock and turn it clockwise until
the seat hook disengages with an audible click. Pull the
seat backwards off its retainers.
The helmet cable (1) is in the front part of the underseat
compartment (see page 43). Pass the cable through the
helmet and fit the ends of the cable into the pin (2).
Leave the helmet hanging and refit the seat to secure it.
Warning
This device protects the helmet against theft when
the motorcycle is parked. Do not leave the helmet
attached in this way when riding the motorcycle as it
can interfere with riding and cause loss of control of the
motorcycle.
Closing
Make sure all parts are correctly arranged and secured in
the underseat compartment. Fit the front hooks on the
base of the seat under the tube running across the frame,
then press down on its rear until it clicks audibly into
position in the lock. Make sure the seat is securely
mounted to the frame and remove the key from the lock.
0
1
1
2
E
fig. 21
fig. 22
27