Checking Brake Pads For Wear - Ducati Multistrada 620 2005 Manuel D'utilisation Et Entretien

Checking brake pads for wear (fig. 47)
To facilitate inspection without removing the pads from
the callipers, brake pads have a wear mark. If the grooves
MIN
in the friction material are still visible, the pad is still in
MIN
good condition.
The rear brake pads must be replaced when about 1 mm
of friction lining (fig. 47a) is still visible through the
E
opening in the callipers.
Important
Have the brake pads replaced at a Ducati Dealer or
Authorized Workshop.
MTS
MTS fig. 47
620 620 Dark
1 mm
fig. 47a
58