Corghi EXACT LINEAR Manuel D'utilisation page 56

➥ Sorting
Alphabetical: display of vehicles in alphabeti-
cal order of description.
Date: display of vehicles in order of MOT
registration date.
➥ Makes display
Graphic.
➥ Short-form selection
YES: during vehicle selection the model is
supplied with single description.
NO: during vehicle selection the model is
supplied with multiple description.
➥ Selection by year
YES: selection of vehicle by year of MOT
registration on.
NO: selection of vehicle by year of MOT
registration off.
➥ Vehicle description
Commercial: vehicle description supplied
using commercial names.
Manufacturer: vehicle description supplied
by means of the codes used by the manufac-
turers to identify the different types of wheel
alignment.
Job record
➥ Type
Minimum: record containing on the essential
customer and vehicle data.
Complete: record containing full data on the
customer and vehicle.
Professional: record containing redundant
customer and vehicle data.
➥ Record sorting
Date: In the management function job records
are sorted by date.
Customer: In the management function job
records are sorted by customer.
Vehicle registration number: In the man-
agement function job records are sorted by
vehicle registration number.
Operator: In the management function job
records are sorted by operator.
Order number: In the management function
job records are sorted by order number.
➥ Customer correspondence
No.
➥ Enable modifications
Yes: allows modification of the adjustment
data of a job saved in the memory.
No:
56
Shows all pages
Yes: For entering all customer and vehicle
data.
No: Only the essential customer and vehicle
data is requested.
Alignment procedure
➥ Vehicle weight procedure enabling
YES: vehicle weight procedure enabled.
NO: vehicle weight procedure not enabled.
➥ Lift test
YES: lift test procedure enabled.
NO: lift test procedure not enabled.
➥ Vehicle selection
Always activated: Selection of vehicle from
databank always activated.
On request: Selection of vehicle from data-
bank activated on request.
➥ Vehicle selection mode
Databank: Selection of vehicle from data-
bank, job record compilation on request.
Job record: compilation of job record with
activation of vehicle from databank if neces-
sary.
➥ Rim diameter
Always: If toes are set in millimetres or inches,
the step for input of the rim diameter is always
activated.
On request: If toes are set in millimetres or
inches, the step for input of the rim diameter
is activated either by the operator or automati-
cally if the reference diameter is not available
in the databank.
➥ Caster measurement steering lock
Always activated: Caster measurement steer-
ing lock always activated.
On request: Caster measurement steering
lock activated on request.
If adjustable: Caster measurement steering
lock only activated if at least one of the angles
that can be measured is adjustable (caster,
king pin, steering angle difference at 20° and
maximum steering angle).
➥ Rear axle
Always activated: Rear axle adjustment always
activated.
If adjustable: Rear axle adjustment only ac-
tivated if at least one of the angles that can
be measured is adjustable (half toe, camber,
total toe, setback).
➥ Second steering
Operator's manual EXACT LINEAR