Corghi EXACT LINEAR Manuel D'utilisation page 52

Non standard toe sign convention.
Non standard thrust angle sign con-
vention.
Save job in progress.
PC keypad
The keypad function keys give rapid access to
programme steps. They always retain the same
functions and are only active if the relative icon
is included in the screen.
The keys indicated as in the following example
È+F12 are the combination of the "Upper case"
key and the key indicated (in the example, F12).
Key Name
F1 Databank selection
F2 Rim diameter
F3 Chassis clearance
F4 Steering angle
F5 State of vehicle
F6 Rear axle
F7 Front axle
F8 Print
F9 End of job
F11 Databank
F12 Help
È+F1 Test screen
È+F12 Information window
Recalls the information about the
aligner software and databank onto
the screen.
52
Characteristic angle symbols for
In the adjustment screens, the vehicle's char-
acteristic angles are referred to by means of
graphic symbols.
signs.
standard sign conventions.
NAULT sign conventions.
Icon
ventions.
conventions.
ventions.
conventions.
multilink cars.
adjustment screens
Total front toe with standard signs.
Total front toe with RENAULT reversed
LH and RH half toes with
LH and RH half toes with RE-
LH and RH camber.
LH and RH front casters.
Total rear toe with standard sign con-
Total rear toe with RENAULT sign
Thrust angle with standard sign con-
Thrust angle with MERCEDES sign
Front setback.
Rear setback.
Track difference.
Toe constant (S-POINT) for
Rear axle offset.
Operator's manual EXACT LINEAR