Service Programs - Corghi EXACT LINEAR Manuel D'utilisation

Save job Saves the current job in the
jobs archive.
Compile job record Recalls compilation
of the job record data.
Vehicle adjustments
Copy Starts copying of the vehicle
adjustment help function.
Pause Stops copying of the vehicle
help function and restarts it from the same point.
Stop Stops playback of an animation,
returning to the first image (only applies to ani-
mations, not to stationary images).
Front toe Selects the front toe adjust-
ment help function.
Rear toe Selects the rear toe adjust-
ment help function.
Front camber Selects the front camber
adjustment help function.
Rear camber Selects the rear camber
adjustment help function.
Front caster Selects the front caster
adjustment help function.
Front king pin Selects the front king
pin adjustment help function.
Toe curve adjustment Selects the toe
curve adjustment help function.
Toe curve measurement Selects the
toe curve measurement help function.
50
Set-up and maintenance
Demo Vehicle wheel alignment proce-
dure is executed in demonstration mode; use of
targets not required.
Set-up Recalls the aligner set-up
procedure.
Save data Procedure for saving or re-
freshing the job archive and the user databank.

Service Programs

Test Target diagnostics instruments.
Software update Wheel aligner and/or
main databank software update.
Technical assistance Service pro-
grammes restricted to technical assistance.
Exit to Windows Exits to the operating
system. A password must be entered in order to
access the operating system.
Management and jobs archive
Job records Jobs archive management.
Customer records Customer archive
management.
Vehicle records Management of the
registered vehicle data archive.
Operator records Operator archive
management.
Customer correspondence Prints ad-
dresses of the customers on file.
Makes For entering makes not pre-
sent in the main databank, for the user data-
bank.
Operator's manual EXACT LINEAR