Mennekes ACU Instructions D'installation page 61

Only with Mennekes Binary Protocol 3.9
Fig. 20: ACU backend – Monitoring
Parameters Description
URL IP address of the monitoring server.
Port List port of the monitoring server.
Name Access name for server.
Pass Access password for server.
Encrypt To be activated if connection is to be
encrypted via certificate.
Interval Update interval in minutes.
Upload Upload X.509 certificate if connection is to
certificate be encrypted.
Encrypting the connection
Precondition:
 You are in possession of a valid X.509 certificate. The
certificate is available on request from your backend
operator.
ACU Backend – Remote control / Trigger
The "Remote control" tab is only available if the "Open
Charge Point Protocol v1.5" is selected. If you select
"Mennekes Binary Protocol 3.9", the "Trigger" tab will
appear instead.
The backend system can receive commands such as
"Remote authorization" and "Terminate charging process"
through the remote control interface.
Please consult your backend operator if you want to use
the remote control interface.
Only with Open Charge Point Protocol v1.5
Fig. 21: ACU backend – remote control
Parameters Description
Encrypt To be activated if connection is to be
connection encrypted via certificate.
Remote port Port number of the ACU.
Upload CA
Upload CA certificate if connection is to be
certificate encrypted.
Upload Upload server certificate if connection is to
certificate be encrypted.
Certificate Entry of the certificate password.
password
EN
25