Publicité
- Measure the width of the rim using the calliper provided (Fig. 11);
- modify the width value displayed by pressing the keys
number is set.
The WIDTH can be set in millimetres or the values already set can be converted from
inches to millimetres by pressing the
Keep the
values.
w
heel data entrY for wheel balancers version with autoMatic sensor
To enter the distance, diameter and width values automatically, proceed as follows:
- bring the automatic internal measuring arm (A, Fig. 7) into contact with the inner
side of the rim as shown in fig. 10/10a and at the same time bring the automatic
external measuring arm (B, Fig. 7) into contact with the outer side fig. 11a.
74
keys pressed to rapidly increase or decrease the previously set
with external sensor
11
button for five seconds.
(
) "
width
if present
Operator's manual MT 3100 - MT3200
until the desired
"
Publicité
