Publicité
CAUTION
Do not stack more than two packs to avoid damaging them.
The machine may be moved for installation or for subsequent relocation as follows:
- with a crane, using special equipment that holds the machine at the designated lift-
ing points (Fig. 2);
- by inserting the forks of a lift truck under the machine so that the centre of the forks
correspond approximately to the centre line of the body (Fig. 3).
WARNING
Always unplug the power supply cable from the socket before moving the machine.
CAUTION
Never apply force to the wheel spin shaft when moving the machine.
58
2
Operator's manual MT 3100 - MT3200
3
Publicité
