Publicité
WARNING
Take the utmost care when unpacking, assembling, lifting and setting up the ma-
chine as indicated below.
Failure to observe these instructions may result in damage to the machine and
injury to the operator or other persons.
Remove the original packaging materials after positioning them as indicated on the
packaging and keep them intact so the machine can be safely shipped at a later
date if necessary.
WARNING
The place where the machine is to be installed must conform to applicable safety
at work regulations.
In particular, the machine must only be installed and operated in protected envi-
ronments where there is no risk of exposure to dripping.
IMPORTANT: for the correct and safe operation of the machine, the lighting level in
the place of use should be at least 300 lux.
The floor must be strong enough to support a load equal to the weight of the equip-
ment plus the maximum load allowed. The support base on the floor and the envisaged
fixing means must also be taken into account.
Environmental operating conditions must comply with the following requirements:
- relative humidity ranging from 30% to 80% (without condensation);
- temperature ranging from 0° to +50°C.
CAUTION
For information concerning the technical features, warnings and maintenance
instructions consult the related operator manuals provided with the documenta-
tion of the machine.
WARNING
The machine must not be operated in potentially explosive atmospheres.
The machine is supplied partially disassembled and is to be assembled according to
the procedures described below.
Operator's manual MT 3100 - MT3200
INSTALLATION
59
Publicité
