Publicité
- Low balancing speed:
• minimises wheel spin times;
• reduces risk due to rotating parts;
• saves energy.
- Automatic sensor for measuring distance, diameter (version with digital sensors).
- Automatic sensor for width measurement (if present).
- Automatic brake for stopping the wheel at the end of the spin.
- Wheel holder shaft locking brake (optional)
- STOP button to stop the machine immediately.
- Side flange holders.
- Top tray to take weights of all types.
- Automatic start by lowering the guard.
- Luminous digital display unit double display and 3D graphics.
- Microprocessor processing unit (16 bit).
- Resolution: 1g (1/10oz).
- Wide selection of programmes making the machine easy to use.
- Unbalance value display in grams or ounces.
- Unbalance display rounding-off setting.
- Balancing modes available:
• Standard
• Alu/ALU P = EASY ALU
• Motorcycle Dynamic
• Motorcycle Alu dynamic
• Static
- "Mobile Planes" programme (in ALU P = EASY ALU) for using multiple five-gram weights,
i.e. available without the need for partial cuts.
- "Hidden weight" programme (in ALU P = EASY ALU) for dividing the outer side balanc-
ing adhesive weight into two equal weights positioned behind the spokes of the rim.
- "Split Weight" programme (motorcycle programmes) to divide the weight into two
equivalent values to be placed on either side of the spoke.
- "OPT flash" programme for rapid optimisation of operating noise reduction.
- General utility programmes:
• Calibration;
• Service;
• Diagnostics.
- Possibility to select the position for applying the adhesive weight:
• Operator side horizontal plane (H3);
• Vertical plane in the lower part of the wheel (H6);
• Vertical plane in the upper part of the wheel (H12).
Operator's manual MT 3100 - MT3200
MAIN FEATURES
dynamic on both rim sides
seven different possibilities for alloy rims
on both sides of motorcycle rims
on both sides of alloy motorcycle rims
on a single side.
67
Publicité
