Publicité
INTRODUCTION
The purpose of this manual is to provide the owner and operator with effective and
safe instructions for the use and maintenance of the wheel balancer.
Follow all of the instructions carefully and your machine will assist you in your work
and give long-lasting and efficient service, in keeping with manufacturer traditions.
The following paragraphs define the levels of danger regarding the machine, associated
with the warning captions found in this manual.
DANGER
Refers to immediate danger with the risk of serious injury or death.
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Read these instructions carefully before starting the machine. Keep this manual and
all illustrative material supplied with the machine in a folder near it where it is readily
accessible for consultation by the operators.
The technical documentation supplied is considered an integral part of the machine;
in the event of sale all relative documentation must remain with the machine.
The manual is only valid for the machine model and serial number indicated on the
nameplate applied to the machine itself.
WARNING
Comply with the contents of this manual: any uses of the machine that are not
specifically described are under the full responsibility of the operator.
NOTE
Some of the illustrations contained in this booklet have been taken from pictures
of prototypes: standard production machines may differ slightly in certain respects.
These instructions are for the attention of personnel with basic mechanical skills. We
have therefore condensed the descriptions of each operation by omitting detailed in-
structions regarding, for example, how to loosen or tighten the fixing devices. Do not
attempt to perform operations unless properly qualified or with suitable experience.
If necessary, please contact an authorised Service Centre for assistance.
Operator's manual MT 3100 - MT3200
56
Publicité
