Publicité
GENERAL CONDITIONS OF USE
The equipment is intended for professional use only.
WARNING
Only one operator at a time can work with the machine.
The wheel balancers described in this manual must be used exclusively to measure
the extent and position of car wheel unbalances, within the limits specified in the
technical specification section. Furthermore, models equipped with motors must be
provided with a suitable guard, fitted with a safety device, which must be lowered
during the spin operation.
WARNING
Any use of the machine other than the described use is to be considered as im-
proper and unreasonable.
CAUTION
Do not start the machine without the wheel locking equipment.
WARNING
Do not use the machine without the guard and do not tamper with the safety device.
CAUTION
Do not clean or wash the wheels mounted on the machine with compressed air or
jets of water.
WARNING
When working, never use equipment not manufactured by the manufacturer.
WARNING
Get to know your machine: The best way to prevent accidents and obtain top per-
formance from the machine is to ensure that all operators know how the machine
works.
Learn the function and location of all the controls.
Carefully check that all controls on the machine are working properly.
To prevent accidents and personal injury, all the equipment must be correctly
installed, correctly operated and correctly serviced.
Operator's manual MT 3100 - MT3200
71
Publicité
