Publicité
SCRAPPING
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal
parts and dispose of them separately in accordance with current provisions as pre-
scribed by law.
ENVIRONMENTAL INFORMATION
The following disposal procedure shall be exclusively applied to the machines having
the crossed-out bin symbol on their data plate
.
This product may contain substances that can be hazardous to the environment and
to human health if it is not disposed of properly.
The following information is therefore provided to prevent the release of these sub-
stances and to improve the use of natural resources.
Electrical and electronic equipment must never be disposed of in the usual municipal
waste but must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and on this page, reminds the user
that the product must be disposed of properly at the end of its life.
In this way it is possible to prevent that a non specific treatment of the substances
contained in these products, or their improper use, or improper use of their parts
may be hazardous to the environment or to human health. Furthermore, this helps to
recover, recycle and reuse many of the materials contained in these products.
Electrical and electronic manufacturers and distributors set up proper collection and
treatment systems for these products for this purpose.
Contact your local distributor to obtain information on the collection procedures at
the end of the life of your product.
When purchasing this product, your distributor will also inform you of the possibil-
ity to return another end-of-life piece of equipment free of charge as long as it is of
equivalent type and had the same functions as the purchased product.
Any disposal of the product performed in a different way from that described above
will be liable to the penalties provided for by the national regulations in force in the
country where the product is disposed of.
Further measures for environmental protection are recommended: recycling of the
internal and external packaging of the product and proper disposal of used batteries
(only if contained in the product).
Your help is crucial in reducing the amount of natural resources used for manufacturing
electrical and electronic equipment, minimise the use of landfills for product disposal
and improve the quality of life, preventing potentially hazardous substances from being
released in the environment.
Operator's manual MT 3100 - MT3200
100
Publicité
