GRAUPNER Heim Eurocopter Bo 105 CBS Mode D'emploi page 50

®
Bo 105 CBS
1.4.2 Screwing the mechanics to the bottom of the fuselage
The bulkheads 2 and 3 and the support 6 can now be attached to the mechanics using M3 x 16
socket-head cap screws, as shown in the illustration. Once again, take care to keep the
bulkheads the right way round.
At this point the cross-piece at the top of the fuselage should be removed, so that the
mechanics can be installed complete with the bulkheads.
12