Guidelines And Manufacturer's Statement - Electromagnetic Emissions - Hologic Aquilex Fluid Control System Manuel D'instructions Et D'utilisation

Guidelines and manufacturer's statement - electromagnetic compatibility
EN
38
11.3 Guidelines and Manufacturer's Statement – Electromagnetic
Emissions
The Aquilex Fluid Control System is intended for use in the electromagnetic envi-
ronment specified below. The user/operator of the Aquilex Fluid Control System
should make sure the device is operated within such an environment.
Emitted interference Compliance
measurements
HF emission according Group 1
to CISPR 11
HF emission according Class B
to CISPR 11
Emission of harmonic Class A
oscillations according
to IEC 61000-3-2
Emission of voltage In compliance
fluctuations / flickers
according to IEC 61000-
3-3
Electromagnetic environment guide-
lines
The Aquilex Fluid Control System
uses HF energy solely for its internal
functions. Therefore, the camera's
HF emission is very low and it is
unlikely that devices in close proxim-
ity will experience interference.
The Aquilex Fluid Control System is
suitable for use in all facilities includ-
ing those in residential areas and
those directly connected to a public
utility network supplying buildings
used for residential purposes as well.