Guidelines And Manufacturer's Statement - Electromagnetic Emissions - Hologic Aquilex Instructions D'utilisation

12.2 Guidelines and Manufacturer's Statement – Electromagnetic
Emissions
The Aquilex Fluid Control System is intended for use in the electromagnetic envi-
ronment specified below. The user/operator of the Aquilex Fluid Control System
should make sure the device is operated within such an environment.
WARNING!
Electromagnetic emissions may increase and rise above the permissible limits if
other equipment (e.g. MyoSure® Control Unit) is stacked onto or placed directly
next to the Aquilex Fluid Control System. The user is responsible for monitoring
the devices to make sure they function properly.
Emitted interference Compliance
measurements
HF emission according Group 1
to CISPR 11
HF emission according Class B
to CISPR 11
Emission of harmonic Class A
oscillations according
to IEC 61000-3-2
Emission of voltage In compliance
fluctuations / flickers
according to
IEC 61000 3-3
Guidelines and Manufacturer's Statement - Electromagnetic Compatibility
Electromagnetic environment guide-
lines
The Aquilex Fluid Control System
uses HF energy solely for its internal
functions. Therefore the HF emission
is very low and it is unlikely that
devices in close proximity will experi-
ence interference.
The Aquilex Fluid Control System is
suitable for use in all facilities includ-
ing those in residential areas and
those directly connected to a public
utility network supplying buildings
used for residential purposes as well.
en
45