Technical Data - Hologic Aquilex Fluid Control System Manuel D'instructions Et D'utilisation

10

Technical Data

Model or type designation
Mains voltage range [V]
Supply frequency range [Hz]
Fuse designation
Power consumption
Upper voltage range
Normal operation
Peak
Lower voltage range
Normal operation
Peak
Protection class (I, II, III)
Application part type (B, BF, CF)
Defibrillator protected (yes/no)
Protection type (IP code)
Classification (I, IIa, IIb, III) acc. to Appendix IX of Euro-
pean MDD
Conformity with the following standards:
Operating conditions
Use possible with flammable anesthetic gases
Storage and transportation conditions
Max. sound level:
Maximum load
Adjustable values
Pressure range [mmHg]
Measurement range
Flow [ml/min]
Pressure [mmHg]
Deficit [ml]
Accuracy repeatability
Flow [ml/min]
Pressure [mmHg]
Deficit [ml]
Dimensions Width x Height x Depth
[in], [mm]
Weight [lbs], [kg]
AQL-100
100-240 V
50-60 Hz
2x T 3.15 AH, 250 V, UL- recognized
Current [A] Voltage [V]
0.19 A 240 V
0.69 A 240 V
0.52 A 100 V
1.70 A 100 V
I
Designed to work within a BF isolated system
No
IP41 (Pump unit), IP21 (Scale)
IIb
EN 60601-1:2006 / IEC 60601-1:2005
EN 60601-1-2:2007 / IEC 60601-1-2:2007
10 to 40 °C / 50 to 104 °F
30 to 75 % rel. humidity
70 to 106 kPa air pressure
3000 m max. altitude above sea level for device use
This system is not designed for use with flammable anesthetic
agents (Class AP) or flammable anesthetic agents with oxidants
(Class APG).
-20 to +70 °C / -4 to +158 °F
10 to 90 % rel. humidity
70 to 106 kPa air pressure
<80 dB(A)
65 lbs/30 kg
40-150 mmHg
0-800 ml/min
0-500 mmHg
-995/+9995
± 5 ml/min
±2 mmHg
±10 ml
12 in x 6 in x 12 in / 300 mm x 140 mm x 300 mm (AQL-100P),
26 in x 52 in x 26 in / 670 mm x 1320 mm x 670 mm (AQL-100CS)
13 lbs [5.8 kg] (AQL-100P), 23 lbs [10.5 kg] (AQL-100CS)
Technical Data
EN
Power consumption
[VA/W]
45 VA
165 VA
52 VA
170 VA
35