Error and Warning Messages
Pump Display Message
EN
Scale Overloaded
Check scale
Communication Error
Calibration Error
Sensor Error
Motor Error
Low Vac Failed Use Alternative
High Vac Failed Use Alternative
Vac Systems Out Use Alternative
34
Pump Audible Tone
3 audible tones
5 audible tones
5 audible tones
5 audible tones
5 audible tones
3 audible tones
3 audible tones
3 audible tones
Instructions
Scale weight exceeds 65 lbs. Weight on
scale must be reduced. System function
will resume once excess weight is
removed.
Contact Hologic Technical Support.
Contact Hologic Technical Support.
Contact Hologic Technical Support.
Contact Hologic Technical Support.
A substitute low pressure vacuum
source is necessary to continue proce-
dure. Contact Hologic Technical Support.
A substitute high pressure vacuum
source is necessary to continue proce-
dure. Contact Hologic Technical Support.
Substitute vacuum sources are neces-
sary to continue the procedure. Contact
Hologic Technical Support.