Drawings - MORIA 65005 Manuel Utilisateur

11 DRAWINGS

A. CB HEAD
1 Head calibration value
2 Female threaded collar
3 Blade housing
4 Sliding guide
B. CBm HEAD
1 Head calibration value
2 Female threaded collar
3 Blade housing
4 Sliding guide
C. CBSU HEAD
1 Head calibration value
2 Blade
D. CBm BLADE
1 Cutting edge
2 Blade holder
E. CBm HEAD WITH INSERTED CBm BLADE
1 CBm head
2 CBm blade
F. MOUNTING THE CBm HEAD ON THE CB
TURBINE
1 CB turbine
2 CBm head
G. MOUNTING THE CBSU ON THE CB TURBINE
1 CB turbine
2 CBSU head
3 Blister of the CBSU head
H MOUNTING THE PNEUMATIC TURBINE
HOSE
1 Pneumatic turbine hose – turbine end
2 CB turbine
3 CBm head
4 Control unit front panel
5 Pneumatic turbine hose – console end
I. CB MANUAL SUCTION RING
1 Handle
2 Sliding guide
3 Stop pin
4 Smooth pivot (manual ring)
5 Aperture
J. CONNECTING THE SUCTION RING TO THE
ASPIRATION TUBING
1 Aspiration tubing end
2 Suction ring end
K. MOUNTING CB MICROKERATOME ON THE
SUCTION RING
1 CB turbine with CBm head
2 CB manual suction ring
L. STERILIZATION BOX
1 CB turbine
2 Pneumatic turbine hose
3 CB manual suction ring
4 CBm heads
5 Tonometer
#65005-F-02.2017
15
MORIA