Labels & Symbols; Vibration Level - Evolution RAGE 5 Instructions D'origine

www.evolutionpowertools.com
LABELS & SYMBOLS
Symbol Description
V
A Amperes
Hz
Min -1
~ Alternating current
n o No load speed
Wear safety goggles
Wear ear protection
Do not touch
Wear dust protection
Read Instructions
Warning
CE certification
Waste electrical and
electronic equipment
WARNING:
warning and/or instruction labels are missing
or damaged. Contact evolution power tools for
Volts
replacement labels.
Only use genuine Evolution replacement
blades. Unauthorized blades may be
dangerous! Keep the blades securely fastened.
Check for debris before installing any new
Hertz
blades and do not use dull or broken blades.
Check the blades regularly for condition
Speed
and wear. Damaged or worn blades should
be replaced immediately. Loose fitting
or damaged guards must be replaced
immediately. Beware of ejecting chips as they
may be HOT. Always make provisions for safe
handling of excess material.

VIBRATION LEVEL

The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
WARNING
actual use of the power tool can differ from the
declared total value depending on the ways
in which the tool is used. The need to identify
safety measures and to protect the operator
are based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle, such as the times
the tool is switched off, when it is running idle,
in addition to trigger time).
To obtain an additional copy of your manual,
please contact Evolution Power Tools at:
UK: +44 (0)114 251 1022
USA: 1-866-EVO-TOOL
WEB: www.evolutionpowertools.com
5
Do not operate the saw if any
: The vibration emission during
EN
DE
ES
FR
IT
NL