The Function Setting Menu „Function - Reely HCP80 3D RtF Notice D'emploi

14. The Function Setting Menu „Function"
The specific settings for the respective models are made in the function setup menu. The menu items available in the
function setup menu depends on which model type was selected in the system setup menu.
These instructions will only deal with the setting options that are relevant in connection with the helicopter
„HCP80 3D".
The designations of the different control functions in the helicopter programming are partially assumed from the plane
model settings and have the following functions:
AILE = rolling function, ELEV = nodding function, THRO = throttle function, RUDD = tail function
To get to the function settings menu, switch the transmitter on
with the on/off switch and push the button „SELECT". The dis-
play shows the two main menus „Function" and „System".
The menu „Function" already has a black background and can
be called by pushing the „SELECT" button again.
The first 4 menu items of the function setting menu are now
displayed; see figure on the right.
The following setting functions are available for you in the
system setting menu:
Function
Servo direction setting
Servo end deflection setting
Basic trim
Dual rate/exponential setting
Throttle switching
Gyro sensitivity setting
Throttle curve setting
Pitch curve setting
Swash plate servo settings
Pitch/tail mixer
Mixer programming
Mixer programming
Timer
Servo control/test
To leave the function setting menu again and to return to the operating system, push the button „CLEAR"
twice.
Display
„1: REVERSE"
„2: EPA"
„3: SUB TRIM"
„4: D/R"
„5: TH HOLD"
„6: GYRO SEN"
„7: TH CURV"
„8: PIT CURV"
„9: SWASH MIX"
„10: REVO MIX"
„11: PRO MIX1"
„12: PRO MIX2"
„13: TIMER"
„14: MONITOR"
Figure 31
99