Timer „Timer - Reely HCP80 3D RtF Notice D'emploi

l) Timer „TIMER"
The remote control offers the option of starting a timer at the push of a button. The timer time is displayed and during
the last 30 seconds before the end of the set time, the remote control emits acoustic warning sounds. Thus, the flight
time of an electric model can be used perfectly without discharging the rechargeable battery too deeply by linger flight
times and thus damaging it.
Proceed as follows to set the timer:
• Call the function settings menu.
• Select the menu item „TIMER ADJ" with the buttons „UP" or
„DOWN".
• Activate the menu item with the button „SELECT".
The display shows the timer time and the last timer function
set.
The display „INH" represents a deactivated timer. The dis-
play „UP-T" represents a timer counting up and the display
„DOWN-T" represents a timer counting down.
• Push the button „SELECT" to select the timer function „INH",
„UP-T" or „DOWN-T".
• Pushing the buttons „INC (+)" or „DEC (-)" sets the desired
timer time in minutes and seconds.
• The set value is stored automatically.
• Push the „CLEAR" button to get back into the overview of the
function setting menu.
If a timer that counts down is activated, the set timer
time is displayed instead of the transmitter voltage
display, and in case of a timer counting up the display
00:00 is shown (see figure 5, item 2).
If the control stick for the pitch function is moved from
the bottom position upwards, the timer will start.
If the control stick is pulled all the way down again
(motor off position), the running timer will stop.
Figure 47
115