Model Memory Selection „Mdl Sel - Reely HCP80 3D RtF Notice D'emploi

b) Model Memory Selection „MDL SEL"
The remote control system has 10 model memories which allow you to save the data for your respective models
independently of one another. Therefore, it is required to set the associated model memory in the transmitter before
operating a specific model.
To select one of the 10 model memories, proceeded as follows:
• Call the system settings menu.
• Select the menu item „MDL SEL" with the buttons „UP" or
„DOWN".
• Activate the menu item with the button „SELECT".
The display shows the currently called model memory, the
modulation type and the model type and the model name.
• Pushing the buttons „INC (+)" and „DEC (-)" sets the de-
scribed model memory. The setting is saved automatically.
• Push the button „CLEAR" to get back into the overview of the
system setting menu.
• Return to the operating display and check if the desired
model memory is active.
After switching on the remote control system, the last
model memory setting is activated again.
92
Figure 24