Reely HCP80 3D RtF Notice D'emploi page 86

Roll trimming:
If the helicopter tries to drift or tip to the right, reduce the speed until the helicopter is standing safely on its skids again.
Now push the trim button for the rolling function (also see figure 1, item 6) to the left several times.
Push the pitch stick carefully forward and check if the adjustment was sufficient. Repeat the procedure until the model
does not show any tendency to drift to the right.
If the helicopter tries to drift to the left, push the trim button for the rolling function to the right.
The display shows the change of the rolling trimming at the trimming display (see figure 5, item 7). The set
value is stored automatically.
Nod trimming:
If the helicopter tries to drift forward, reduce the speed until the helicopter is standing safely on its skids again. Now
push the trim button for the nodding function (also see figure 1, item 5) down or towards your body several times.
Push the Pitch stick carefully forward and check if the adjustment was sufficient. Repeat the procedure until the model
does not show any tendency to drift forward.
If the helicopter tries to drift backwards, push the trim button for the nodding function up or away from your body.
The display shows the change of the rolling trimming at the trimming display (see figure 5, item 4). The set
value is stored automatically.
86
Figure 18
Figure 19