Servo Direction Setting „Reverse - Reely HCP80 3D RtF Notice D'emploi

a) Servo Direction Setting „REVERSE"
Depending on the position of the servos, a control movement to the left on the transmitter may invoke a steering move-
ment to the right. This is why the transmitter allows you to individually set and save the rotting or running direction of
every individual servo.
To set the servo running direction speed, proceed as follows:
• Call the function settings menu.
• The menu item „REVERSE SELECT" already has a black
background and can be called with the button „SELECT".
In the display you will see display items for the six control
functions with the respective currently set running directions.
„N" corresponds to the standard running direction of the ser-
vo and „R" to the reversed running direction. Below channel
1, there is an arrow pointing up, showing that this channel
can now be set.
• Pushing the buttons „INC (+)" or „DEC (-)" sets the described
servo running direction at channel 1. The setting is saved
automatically.
• Push the button „SELECT" to switch to the second channel.
The arrow pointing up jumps under the second channel.
• The second channel is set according to the same pattern as
the first one.
• Repeat the above procedure until the running directions of all
six servos/channels have been programmed.
• Push the button „CLEAR" to get back into the overview of the
function setting menu.
100
Figure 32