Calibrate Pitch Stick Centre Position „Stk Adj - Reely HCP80 3D RtF Notice D'emploi

g) Calibrate Pitch Stick Centre Position „STK ADJ"
The remote control offers the option of electronically calibrating the mechanical middle position of the pitch control
stick. Then the mechanical and electronic middle positions match precisely.
To calibrate the pitch control stick, proceed as follows:
• Call the system settings menu.
• Select the menu item „STK ADJ" with the buttons „UP" or
„DOWN".
• Activate the menu item with the button „SELECT".
The display shows the safety prompt asking if you want to
calibrate the control stick.
• Push the pitch control stick into the precise middle position.
• Pushing the button „SELECT" will start calibration.
• Successful calibration is displayed by the message „SET
OK".
• Push the pitch control stick back to the bottom position.
• Push the button „CLEAR" to get back into the overview of the
system setting menu.
98
Figure 30